Aerospace Defense Mass Transit Marine Brochure Page 18 Material Solutions

18 Label Materials For full material specs, visit BradyID.com/techdata and search by the B-Number. B-472 Self-Extinguishing Wire Wrap Label B-472 Polymide Wire Wraps are highly flame-retardant and specifically designed for wire and cable identification applications where self-extinguishing and flame retardant properties are an absolute requirement. In addition, B-472 can also be used for component labeling and Unique Identification (UID) labeling. B-437 Self-Extinguishing Wire Wrap Labels Tedlar Wire Wrap Labels (B-437) are self-extinguishing and exhibit good solvent and heat resistance. This material is intended for cable and wire bundle applications where self-extinguishing properties are required. Printer Compatibility: Bradyprinter i7100 Industrial Label Printer Brady IP Printer Wraptor A6500 Printer Applicator BMP 71 Printer Printer Compatibility: Bradyprinter i7100 Industrial Label Printer Brady IP Printer BMP 71 Printer Ribbon Compatibility: R4300 Series R6200 High Performance Series Ribbon Compatibility: R4300 Series R6200 High Performance Series Temp Range: -94F to 275F (-70C to 135C) Temp Range: -94F to 275F (-70C to 135C) Wire Diameters: 0.079" (2.02 mm) and up Available Colors: Meets Specs: RoHS Compliant SAE-AS-81531 MIL-STD-202 method 215k * with approved ribbons and surfaces Meets Specs: RoHS Compliant MIL-M-87958 Boeing BMS 13-47 * with approved ribbons and surfaces Tested per: ASTMD 1000 (Flammability) ASTM E162 (Flame Spread) ASTM E662 (Flame Emission) White Yellow Available Colors: White Yellow Continuous Fits Wire Diameters: 0.063" (1.61 mm) and up B-637 Self-Extinguishing Dot Matrix Wire Wrap Labels Tedlar Dot Matrix Printable Wire Wrap Labels (B-637) are self-extinguishing and exhibit good solvent and heat resistance. This material is intended for cable and wire bundle applications where self-extinguishing properties are required. Printer & Ribbon Compatibility: Material is dot matrix printable on a variety of dot matrix printers using R2000 and R5000 dot matrix ribbons. Temp Range: -94F to 275F (-70C to 135C) Wire Diameters: 0.063" (1.61 mm) and up Available Colors: Meets Specs: RoHS Compliant MIL-M-87958 Boeing BMS 13-47 * with approved ribbons and surfaces White Yellow Tested per: ASTM B 117 Tedlar is a registered trademark of DuPont. Die-Cut Continuous

Previous Page
Next Page