Aerospace Defense Mass Transit Marine Brochure Page 20 Fluid Line Identification Tape

Our Self-Laminating Fluid Line Identification Tape (B-992) is a glossy polyester tape with permanent, pressure sensitive acrylic adhesive. It can also have a clear tail for self-laminating the printed legend to provide additional durability. In addition, these tapes can eliminate the need for painting, hot stamping and etching of rigid tube identification. Subsurface Printed Fluid Line ID Tape: B-999 The Subsurface Printed Fluid Line Identification Tape (B-999) is available in a continuous rollform or die-cut format. It is a subsurface printed, flexible, transparent polyester film tape with heat activated adhesive. The adhesive has superior resistance to fuels, oils, and hydraulic fluids when compared to typical pressure sensitive adhesives. The B-999 tape's low initial adhesion makes the tape easy to reposition when first applied. B-999 tapes meet Boeing BPS-T-151 and colors target MIL-STD-1247C. O Type 1 - 1" wide without a printable zone O Type 2 - 3" wide with dot matrix or thermal transfer printable zone O Available in common color code legends Series 5 B-992 Fluid Line Tape Die-cut, self-laminating, 2" wide and is designed to fit specific diameter pipes and tubes. Has a blank, 1" wide area on right portion of label to fit additional printed information as needed. O Can also be perforated or slit for easy positioning on the surface O Colors target MIL-STD-1247C specification Series 2 B-992 Fluid Line Tape Continuous tape that is 2.5" wide and can fit various diameter tubes and pipes. Comes preprinted with MIL-STD-1247C colors and symbols plus has a blank white right side that allows a user to add a part number, flow direction, torque value, and other information as needed. Series1 B-992 Fluid Line Tape Continuous laminated tape that is 1" wide can fit various diameter tubes and pipes. Tape comes preprinted with MIL-STD-1247C colors and symbols. Series 3 Laminating Tape Clear continuous tape used to laminate Series 2 fluid line tapes. O Meets LMA-MF099 performance requirements Series 4 B-992 Fluid Line Tape Die-cut, self-laminating, 2.5" wide material designed to fit specific diameter pipes and tubes. Has blank, 1.5" wide area on the right portion of the label to fit additional printed information as needed that can be either yellow or white. O Can be perforated or slit for easy separation of function and printable areas O Meet Bell 31-099, Boeing Helicopter HS184 Glossy Fluid Line ID Tape: B-992 Specifications: O LMA-MF099 O LMA-MF092B O LMA-MF093C O LMA-MF094C O FMS-3099A Recommended Ribbon: O R6000 Series Recommended Ribbon: O R4300 Series Scan for Detailed Technical Information Enter "B-992" or "B-999", the material number. 20

Previous Page
Next Page