Aerospace Defense Mass Transit Marine Brochure Page 21 Material Solutions

21 1-888-272-3946 BradyID.com Label Materials For full material specs, visit BradyID.com/techdata and search by the B-Number. B-992 Glossy Fluid Line ID Tape Our Self-Laminating Fluid Line Identification Tape (B-992) is a glossy polyester tape with permanent, pressure sensitive acrylic adhesive. It can also have a clear tail for self-laminating the printed legend to provide additional durability. In addition, these tapes can eliminate the need for painting, hot stamping and etching of rigid tube identification. B-999 Subsurface Printed Fluid Line ID Tape The Subsurface Printed Fluid Line Identification Tape (B-999) is available in a continuous rollform or die-cut format. It is a subsurface printed, flexible, transparent polyester film tape with heat activated adhesive. The adhesive has superior resistance to fuels, oils, and hydraulic fluids when compared to typical pressure sensitive adhesives. The B-999 tape's low initial adhesion makes the tape easy to reposition when first applied. O O Type 1 - 1" wide without a printable zone O O Type 2 - 3" wide with dot matrix or thermal transfer printable zone O O Available in common color code legends Specifications: LMA-MF099 LMA-MF092B LMA-MF093C LMA-MF094C FMS-3099A Series 5 Fluid Line Tape Die-cut, self-laminating, 2" wide is designed to fit specific diameter pipes and tubes. O O Has a blank, 1" wide area on right portion of label to fit additional printed information as needed. O O Can also be perforated or slit for easy positioning on the surface O O Colors target MIL-STD-1247C specification Series 2 Fluid Line Tape Continuous 2.5" tape fits various diameter tubes and pipes. O O Preprinted with MIL-STD-1247C colors and symbols O O blank white right side for part number, flow direction, torque value, or other information. Series1 Fluid Line Tape Continuous 1" laminated tape fits various diameter tubes and pipes. O O Preprinted with MIL-STD-1247C colors and symbols. Series 3 Laminating Tape Clear continuous tape used to laminate Series 2 fluid line tapes. O O Meets LMA-MF099 performance requirements Series 4 Fluid Line Tape Die-cut, self-laminating, 2.5" wide material designed to fit specific diameter pipes and tubes. O O Has a blank, 1.5" wide area on the right fits printed information as needed and can be either yellow or white. O O Can be perforated or slit for easy separation of function and printable areas O O Meet Bell 31-099, Boeing Helicopter HS184 Ribbon Compatibility: R6000 Standard Series Specifications: Boeing BPS-T-151 and colors target MIL-STD-1247C Ribbon Compatibility: R6000 Standard Series

Previous Page
Next Page