Safety Facility Equipment Identification Catalog Page 247 Pipe Markers

247 Pipe Markers Pipe Marker Materials High Performance Pipe Markers Brady High Performance Markers are designed for use in harsh environments where there's significant exposure to sunlight, heat, and/or chemicals. B-689 High Performance Polyester PVF overlaminated polyester with sealed-in graphics. Markers are resistant to abrasion, chemicals, high humidity, and outdoor weathering. Supplied precoiled for easy wrap-around installation on pipes up to 7-7/8" in diameter B-681/B-883 High Performance High Visibility B-681 labels are factory applied to our B-883 FRP carrier. Directional arrows are applied by the installer. Markers are fastened to the pipe with Stainless Steel Strapping, sold separately Self-Sticking Vinyl Pipe Markers Factory applied industrial grade adhesives simplify marker installation. Simply peel the release coated paper backing from the marker and press the marker in place. Banding each end of the marker with Arrow Tape is recommended to indicate contents flow direction and to secure markers to the pipe. B-946 Self-Sticking Vinyl A premium indoor/outdoor material B-681 Food & Beverage Industrial grade self-adhesive protects against bacteria or moisture trapping behind the pipe marker. B-736 Pipe Markers-To-Go Economical B-736 material with surface printed plastic for use on smooth, clean, dry pipe surfaces BradySnap-On and Strap-On Vinyl Unlike installing self-sticking markers, there's no need to clean pipe surfaces. Installation time is reduced. Markers are simply snapped, strapped or wrapped in place. B-915 BradySnap-On and Strap-On Vinyl A mechanically applied, surface printed vinyl pipe marker. Snap- ons are used for pipes less than 6" outside diameter. Strap-ons are designed for pipes from 6" and greater Self-Sticking Pipe Markers Mechanically Applied Pipe Markers HARSH ENVIRONMENT General Purpose Mechanically Applied Self-Sticking Characteristic B-689 Wrap-Around Polyester B-681/B-883 High Performance High Visibility B-915 BradySnap-On and Strap-On Vinyl B-946 Self-Sticking Vinyl B-736 Self-Sticking Plastic Film Plant Environment Indoor Good Avg. Outdoor Durability (yrs.) 5-8 years 3-5 years 2-3 years Surface Abrasion Resistance Good Not Recommended Not Recommended Not Recommended Temperatures Min. Installation Temperature 40 F, 5 C - 0 F, -18 C 50F, 10 C Upper Temperature Limit 248 F, 120 C 230 F, 110 C 180 F, 82 C 212F, 100 C Lower Temperature Limit -40 F, -40 C Pipe Surface Dirty, Dusty Good Not Recommended Not Recommended Rough Good Not Recommended Insulated Good Wet Good Not Recommended Not Recommended Greasy, Oily Good Not Recommended Not Recommended Chemical Resistance Organic Solvents (MEK, Acetone, Toluene) Not Recommended Not Recommended Not Recommended Not Recommended Not Recommended Acids (Sulfuric, HCL, Acetic) Good Not Recommended Not Recommended Good Alkalis (Sodium Hydroxide) Good Not Recommended Not Recommended Not Recommended Alcohols (Methanol, Isopropanol) Good Grease/Oils (SAE 20, ASTM #3) Good Special Properties Low PVC - Pipe contact point Yes No Low PVC - Whole marker No Yes No Low Halogen - Pipe contact point Yes No Low Halogen - Whole marker No Yes No Meets ASME (ANSI) A13.1 Yes Not Recommended = marker not recommended for environment listed Good = marker suitable for environment listed Pipe Marker Material Descriptions BradyID.com/s34 1-888-272-3946 BradyID.com/s34

Previous Page
Next Page