BradyID.com/i5100 1-888-272-3946 3
1 Top-loading design Reduces footprint in your workspace and simplifies media alignment and loading 2 Ribbon takeup spindle Both spindles are keyed for guaranteed correct ink-side orientation and slip quickly into place with no complicated ribbon thread-through, no axles to loosen or tighten and no separate cardboard core needed 3 Print head 300 or 600 dpi print heads are interchangeable through the Brady service department so you can change your print resolution if your needs change 4 Media guide adjustment (center-aligned media) A simple turn of the dial auto-centers the media guides from 5.1 mm to 114 mm widths 5 Sensors Both the gap and notch sensors are easy to adjust, and with IP-enabled media rolls, sensors are auto-detected and the correct settings are displayed for the user 6 Color touchscreen control panel Icons and sliders for easy printer setting adjustments and information about parts when using Brady IP-enabled rolls 7 Roll holder with label part detection Printer auto-detects IP-enabled label rolls to communicate part set up information to both printer and Brady software. Holds 3 in. core roll 8 Ribbon cog with ribbon part detection Printer auto-detects IP-enabled ribbon part and communicates ribbon information to the user and warns if the incorrect ribbon is used 9 Interface options 2x USB, USB 2.0, RS-232C, Ethernet and SD card (back of printer) Print roller Green synthetic rubber rollers available in 4 widths and can be replaced by the user if worn, or to pair a narrow roller with narrow media Integrated auto-cutter (optional model) Built-in cutter for complete cut through of approved media 11 10 1 7 8 9 3 4 5 2
11 6 10
Previous Page