343
Pipe Markers
Pipe Marking Guide
Self-Sticking Mechanically Applied
B-946 Self-Sticking Marker B-736 Self-Sticking Markers-To-Go B-915 Snap-On Marker B-915 Strap-On Marker B-689 Wrap-Around Marker B-681 / B-883 High-Performance High-Visibility Marker
Overview
Marker Type Premium self-adhesive marker for indoor or outdoor use in either individual markers or roll-form. Economical self-adhesive roll-form markers for smooth, clean, dry pipe surfaces. Non-adhesive coiled pipe marker "snaps" around pipe giving 360 visibility while remaining easily removeable Non-adhesive vinyl marker applied with nylon stapping (included). Wrap-around marker with an adhesive edge to secure marker. Repeating legends offers 360 visibility. Polyester marker applied to a fiberglass carrier. Markers fasten to pipe with with included mounting clips and strapping (sold separately). Marker Material Vinyl Plastic Film Vinyl Polyester Plastic Carrier Installation Type Adhesive Snap-on Nylon Strapping Wrap-around with adhesive edge Mounting clips (included) & strapping (sold separately) Outer Diameter From less than 0.75 in. to greater than 8 in. - 0.75 in. to 6 in. 6 in. to 15 in. 0.2 in. to 7.875 in. 8 in. or larger
Environment
Indoor
4
Average Outdoor Durability 3 to 5 years 2 to 3 years 5 to 8 years Surface Abrasion Resistance
6 4
Dirty, Dusty Surface
6 4
Rough Surface
4 6 4
Insulated Surface
4
Wet Surface
6 4
Greasy, Oily Surface
6 4
Chemical Resistance
Organic Solvents (MEK, Acetone, Toluene)
6
Acids (Sulfuric, HCL, Acetic)
6 4 6 4
Alkalis (Sodium Hydroxide)
6 4
Alcohols (Methanol, Isopropanol)
4
Grease/Oils (SAE 20, ASTM #3)
4
Temperature
Minimum Installation Temperature 0 F (-18 C) 50 F (0 C) - 40 F (5 C) - Service Temperature -40 F to 180 F (-40 C to 82 C) -40 F to 212 F (-40 C to 100 C) -40 F to 180 F (-40 C to 82 C) -40 F to 180 F (-40 C to 82 C) -40 F to 248 F (-40 C to 120 C) -40 F to 230 F (-40 C to 110 C)
Special Properties
Low PVC - Pipe contact point
6 4
Low PVC - Whole marker
6 4
Low Halogen - Pipe contact point
6 4
Low Halogen - Whole marker
6 4
Meets ASME (ANSI) A13.1
4
BradyID.com/s36 1-888-272-3946 BradyID.com/s36
Previous Page